The driver is made in a metal case and is marked D33-H7 on the front side. The scope of delivery is quite meager, it includes only lamps with drivers and instructions. But the box was dented as if it had been kicked all the way. Eight of which can be seen in the following picture. I would be happy to tell you about these lamps in more detail. The lamps are made in an aluminum case, in the back of which there is a radiator with a fan. The fan guard is pressed onto the heatsink and cannot be removed. On the one hand, this is good, because in a rich package we pay for something that most likely will never be useful to us and will continue to be in the box. The lamp is available in 11 bases: H8, H9, H1, H11, H3, H4, H7, H27/881, H27/880, 9005, 9006. Next, there is a connector on the wire for connecting to the driver.

Bi-color LED bulbs in H7 base

The connection is very tight, in order to snap the connector into place, you need to make a lot of effort, but the connector is not hermetic. Inside the driver is filled with compound as usual. If the polarity is accidentally mixed up, then nothing bad should happen to the lamp, it simply will not turn on. A power cable in a strong braid comes out of the casing. It is assumed that in good weather you can drive with white light, in cloudy and in bad weather with yellow. Also on the driver is indicated the power of 36W. By the way, a few words about the box. On the connector for connecting the power supply to the driver, we see the polarity designation, this designation should be followed, because the lamp cannot work with the reverse polarity of the supply voltage. In this review, I will talk about LED lamps in the H7 base, a distinctive feature of these lamps is that these lamps have the ability to work with two color temperatures of 6500 or 3000 K. Thanks to the soft filler (I don’t know exactly what it is called), the lamps remained safe and sound. The parcel always came to me in 9 days by regular mail. These are the second lamps that I am testing with such a distinctive feature . As for me, it is better the cost is lower and the equipment is more modest. The wire entering and exiting the driver also has a braid.